This is an old revision of the document!
Table of Contents
Infrastructure Hardware
This page covers all other hardware that doesn't fit under the umbrella of testnode hardware.
gw1/gw2
Summary
These two hosts are 1U custom-built Supermicro systems.
gw1 can currently be accessed at irv-gw.front.sepia.ceph.com. It is the old gateway host from when the Sepia lab was in Irvine
gw2 is not powered on or accessible
Hardware Specs
| Count | Manufacturer | Model | Capacity | Notes | |
|---|---|---|---|---|---|
| Chassis | N/A | Supermicro | N/A | ||
| Mainboard | N/A | Supermicro | PDSMi+ | N/A | |
| CPU | 1 | Intel | Xeon X3220 @2.40GHz | N/A | ARK |
| RAM | 4 DIMMs | ? | ? | 1GB | DDR2 667MHz 4GB total |
| HDD | 2 | HGST | HDS721010CLA330 | 1TB | Software RAID1 |
| SSD | |||||
| NIC | 2 | on-board |
store{01,02}.front.sepia.ceph.com
Summary
Serve as the main gluster storage nodes for the rhev cluster. They're running CentOS 7.
store01 was formerly gw.sepia.ceph.com and still hosts a number of services:
store02 was formerly mira123.
Hardware Information
Mira-type chassis with 16GB RAM and 1x Intel(R) Xeon(R) CPU X3430 @ 2.40GHz
Storage
- Populated with 7x 4TB Hitachi HDD
- 20TB Areca RAID5
- One bay is not used in each system so if desired, the stripe size and RAID level could be changed
Networking
- store01 has a 1Gb bridge on the ipmi network from when it was the OpenVPN gateway.
- store01 has a 10Gb uplink with address 8.43.84.133 mainly as a backup “in” to the lab. This is leftover from when the host was the OpenVPN gateway.
- Both nodes have an add-on dual-port 10Gb SFP+ card with both ports cabled and configured as bond0 (bond type 6)
teuthology.front.sepia.ceph.com
Hosted previous teuthology service for Sepia lab. Running Trusty with a custom kernel so the LRC can be mounted. Now only up for legacy purposes. Can be moved to another rack and/or repurposed.
Mira-type chassis with 32GB RAM and 2x Intel(R) Xeon(R) X3440 @ 2.53GHz
Storage
- Populated with 8x 4TB Hitachi HDD
- 80GB Areca RAID6 hosts
/ - 24TB Areca RAID6 hosts
/home
Networking
- 1x cabled but unused 1Gbps link (eth0)
- 1x 10Gbps uplink for all traffic (eth3)
pulpito.front.sepia.ceph.com
Hosts pulpito and paddles. Running Ubuntu Precise.
Mira-type chassis with 16GB RAM and Intel(R) Xeon(R) X3440 @ 2.53GHz
Storage
root@pulpito:~# cli64 vsf info # Name Raid Name Level Capacity Ch/Id/Lun State =============================================================================== 1 ARC-1222-VOL#000 Raid Set # 000 Raid6 400.0GB 00/00/00 Normal 2 ARC-1222-VOL#001 Raid Set # 000 Raid1+0 60.0GB 00/00/01 Normal 3 ARC-1222-VOL#002 Raid Set # 000 Raid6 5510.0GB 00/00/02 Normal =============================================================================== root@pulpito:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 372.5G 0 disk ├─sda1 8:1 0 356.5G 0 part / ├─sda2 8:2 0 1K 0 part └─sda5 8:5 0 16G 0 part [SWAP] sdb 8:16 0 55.9G 0 disk /var/lib/postgresql sdc 8:32 0 5T 0 disk
Networking
- 1x cabled 1Gbps link (eth0)
gitbuilder.ceph.com
Summary
AKA apt-mirror or gitbuilder-archive.
Services
- Serves packages built by gitbuilders
Storage
- 8x 4TB HGST drives
- Volume set 1 is a 80GB RAID6 for the OS
- Volume set 2 is a 24TB RAID6 for /home where all the data for services listed above live
Networking
- 1x 10Gb uplink at address 8.43.84.130
Temporary VPN tunnel for drop.ceph.com access to the longrunningcluster(Must be restarted1)service openvpn restartanytime the VPN service is restarted)
hv01/hv02
Summary
Main RHEV highly available hypervisor nodes. Running RHEL7.
Infra admins have standard ssh access as their user.
Hardware Specs
| Count | Manufacturer | Model | Capacity | Notes | |
|---|---|---|---|---|---|
| Chassis | N/A | Supermicro | SYS-1028U-TRT+ | N/A | |
| Mainboard | N/A | Supermicro | X10DRU-i+ | N/A | |
| CPU | 2 | Intel | E5-2660 v3 @ 2.60GHz | N/A | ARK |
| RAM | 8 DIMMs | Hynix Semiconductor | HMA42GR7MFR4N-TF | 16GB | 128GB total |
| HDD | 0 | ||||
| SSD | 4 | Intel | SSDSC2BB480G6 | 480GB | Software RAID5 |
| NIC | 2 ports | Intel | X540-AT2 | 10Gbps | On-board RJ45. Only useful for 1Gb due to no 10GBASE-T switches |
| NIC | 2 ports | Intel | 82575EB | 1Gbps | Add-On NIC. Not used |
| NIC | 2 ports | Intel | 82599ES | 10Gbps | SFP+ Port 1 for LAN / Port 2 for WAN |
| NIC | 2 ports | Intel | 82599ES | 10Gbps | SFP+ Port 1 for rhevm network / Port 2 unused |
Dual PSU redundantly cabled to two PDUs.
