This is an old revision of the document!

apama{001,002}

Summary

apama001 and apama002 are two nodes in an HP SL4540 Gen8 chassis.

As of this writing, they need to be reinstalled with (probably*) Fedora and added to the longrunningcluster.

The iLOs are accessible but the java KVM is mostly useless since our lack of Enterprise License causes it to quit after POST.

I'm working on updating the firmware on them so F23 can actually be installed without the Red Screen of Death.

* Fedora because it's good to have multiple OSes running OSDs in the same cluster.

	Count	Manufacturer	Model	Capacity	Notes
Chassis	N/A	HP	ProLiant SL4540 Gen8	N/A
Mainboard	N/A	HP	Not Specified	N/A
CPU	2	Intel	Xeon(R) CPU E5-2407 0 @ 2.20GHz	N/A	ARK
RAM	12 DIMMs	Not Specified	Not Specified	4GB	48GB total
HDD	1x	HP	MM0500GBKAK	500GB
HDD	26x	HP	LOGICAL VOLUME (?)	3TB	Labelled as Logical Volumes in smartctl output
SSD	0
NIC	2	Intel	I350 Gigabit Network Connection	1Gb
NIC	1	Mellanox	MT27500	40Gbps?	Not connected
BMC	1	HP	iLO		Firmware 1.13

These also have 10Gb SFP+ ports that are cabled but may need switch port configuration. Probably useful to have before re-adding to cluster.