User Tools

Site Tools


Sidebar

General Lab Info (Mainly for Devs)

Hardware

Lab Infrastructure Services

Misc Admin Tasks
These are infrequently completed tasks that don't fit under any specific service

Production Services

OVH = OVH
RHEV = Sepia RHE instance
Baremetal = Host in Sepia lab

The Attic/Legacy Info

hardware:mira

This is an old revision of the document!


Table of Contents

mira

Summary

We have approximately 124 mira hosts. Some serve as vpshosts hypervisors and some serve as OSD nodes in the longrunningcluster. The remaining nodes are used as baremetal testnodes.

See the [long-running-cluster] and [vps_hosts] groups in ceph-sepia-secrets Ansible inventory to see what systems are used for.

Hardware Specs

Count Manufacturer Model Capacity Notes
Chassis N/A HP ProLiant SL4540 Gen8 N/A
Mainboard N/A HP Not Specified N/A
CPU 2 Intel Xeon(R) CPU E5-2407 0 @ 2.20GHz N/A ARK
RAM 12 DIMMs Not Specified Not Specified 4GB 48GB total
HDD 1x HP MM0500GBKAK 500GB
HDD 25x HP MB3000GBKAC 3TB Labelled as Logical Volumes in smartctl output
SSD 0
NIC 2 Intel I350 Gigabit Network Connection 1Gb
NIC 1 Mellanox MT27500 40Gbps? Not connected
BMC 1 HP iLO Firmware 1.13

These also have 10Gb SFP+ ports that are cabled but may need switch port configuration. Probably useful to have before re-adding to cluster.

Quirks

I was able to install Fedora23 on apama001 but still got Red Screen of Death and “Illegal Opcode” after grub tries to boot the OS. Something about rpm-based distros doesn't like searching for the root partition using UUID.

What fixed it was finding the proper root drive and manually booting to it in a grub rescue prompt. See below.

grub> ls (hd0,msdos1)/boot

vmlinuz-4.2.3-300.fc23.x86_64 System.map-4.2.3-300.fc23.x86_64 config-4. 2.3-300.fc23.x86_64 initramfs-4.2.3-300.fc23.x86_64.img initramfs-0-rescue-ba8d c4c42e5a4ec483a635961112dfd8.img vmlinuz-0-rescue-ba8dc4c42e5a4ec483a635961112d fd8 initrd-plymouth.img                                                         

grub> set root=(hd0 <tab>
Possible partitions are:

Device hd0: No known filesystem detected - Sector size 512B - Total size        488386584KiB

Partition hd0,msdos1: Filesystem type ext* - Last modification time     2016-05-03 18:11:21 Tuesday, UUID 4390d2e3-3154-4855-8ad4-8417c430d982 -        Partition start at 1024KiB - Total size 488385536KiB                                                                                                            
grub> set root=(hd0,msdos1)
grub> linux /boot/vmlinuz-4.2.3-300.fc23.x86_64 root=/dev/sda1
grub> initrd /boot/initramfs-4.2.3-300.fc23.x86_64.img
grub> boot

For CentOS, this had to be modified a bit:

grub> set root=(hd0,msdos1)
grub> linux /vmlinuz-3.10.0-327.el7.x86_64 root=/dev/sdz3 console=ttyS1,115200
grub> initrd /initramfs-3.10.0-327.el7.x86_64.img
grub> boot

There's probably a permanent fix that can be applied in grub.cfg but haven't looked into it.

hardware/mira.1467216584.txt.gz · Last modified: 2016/06/29 16:09 by dgalloway