Differences

This shows you the differences between two versions of the page.

--- services:rhev [2020/02/05 16:27]
djgalloway
+++ services:rhev [2023/02/08 12:08]
akraitman [Summary]
@@ Line 2: / Line 2: @@
 ===== Summary =====
 We have have a RHEV instance running on [[hardware:infrastructure#hv_0103|hv{01..04}]] as the main hypervisor nodes.  They're listed as **Hosts** in the RHEV Manager.
+Currently the RHEV Hosts installed version is 4.3.5-1
 The [[http://mgr01.front.sepia.ceph.com|RHEV Manager]] is a [[https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.1/html/self-hosted_engine_guide/|Self-Hosted VM]] inside the cluster.  The username for logging in is ''admin'' and the password is our standard root password.
@@ Line 52: / Line 54: @@
 The Hypervisors (hv{01..04}) and Storage nodes (ssdstore{01..02}) have entries in ''/etc/hosts'' in case of DNS failure.
+Note: it is important that the version of glusterfs packages on the hypervisors does not exceed the version on the storage nodes (i.e. client is older or equal to server).
 ----
 ===== Creating New VMs =====
+==== How-To ====
+  - Log in
+  - Go to the **Virtual Machines** tab
+  - Click **New VM**
+  - General Settings
+    - **Cluster:** ''hv_cluster''
+    - **Operating System:** ''Linux''
+    - **Optimized for:** ''Server''
+    - **Name:** Whatever you want
+    - Descriptions are also nice
+  - System
+    - **Memory Size:** Up to you (it can take ''4GB'' as input and will convert)
+    - **Total Virtual CPUs:** Also up to you
+  - High Availability
+    - **Highly Available:** Checked (if desired)
+    - Set the **Priority**
+  - Boot Options
+    - Probably PXE then Hard Disk.  This will boot to our Cobbler menu.
+    - You could also do CD-ROM then Hard Disk.  Just check **Attach CD** and select the ISO (these are on ''store01.front.sepia.ceph.com:/srv/isos/67ff9a5d-b5da-4a2f-b5ce-2286bc82e3e4/images/11111111-1111-1111-1111-111111111111'' if you want to add one)
+  - **OK**
+  - Now highlight your new VM
+  - At the bottom, **Disks** tab
+    - **New**
+    - Set the **Size**
+    - **Storage Domain:** ''ssdstorage''
+    - **Allocation Policy:** ''Preallocated'' if IO performance is important
+      - ''Preallocated'' will take longer to create the disk but IO performance in the VM will be faster
+      - ''Thin Provision'' is almost immediate during VM creation but may slow down VM IO performance
+    - **OK**
+  - At the bottom, **Network Interfaces** tab
+    - **New**
+    - **Profile** should be ''front'' or ''wan'' (or both [one of them being on a second NIC] if desired).
+    - **OK**
+  - Now power the VM up (green arrow) and open the console (little computer monitor icon)
+  - You can either
+    - Select an entry from the Cobbler PXE menu (if the new VM is **NOT** in the ansible inventory
+      - Make sure you press ''[Tab]'' and delete almost all of the kickstart parameters (the ''ks='' most importantly)
+    - Add the host to the ansible inventory, and thus, Cobbler, DNS, and DHCP, then set a kickstart in the Cobbler Web UI (see below)
+=== Using a Kickstart with Cobbler ===
+The Sepia Cobbler instance has some kickstart profiles that will automate RHV VM installation.  I think in order to use these, you'd have to get the MAC from the **Network Interfaces** tab in RHV, then put your new VM in the ''ceph-sepia-secrets'' [[https://github.com/ceph/ceph-sepia-secrets/blob/master/ansible/inventory/sepia|ansible inventory]].
+Then run:
+  - ''%%ansible-playbook cobbler.yml --tags systems%%''
+  - ''%%ansible-playbook dhcp-server.yml%%''
+  - ''%%ansible-playbook nameserver.yml --tags records%%''
+(See https://wiki.sepia.ceph.com/doku.php?id=tasks:adding_new_machines for more info)
+In cobbler, you can browse to the system and set the ''Profile'' and ''Kickstart'':
+  * ''dgalloway-ubuntu-vm'' - Installs a basic Ubuntu installation using the entire disk and ''ext4'' filesystem.  I couldn't get ''xfs'' working.
+  * ''dgalloway-rhel-vm'' - I don't remember if this one works but you can try.
+=== A note about installing RHEL/CentOS ===
+You need to specify the URL for the installation repo as a kernel parameter.  So in the Cobbler PXE menu, when you hit ''[Tab]'', add ''%%ksdevice=link inst.repo=http://172.21.0.11/cobbler/ks_mirror/CentOS-X.X-x86_64%%'' replacing X.X with the appropriate version.
+Otherwise you'll end up with an error like ''dracut initqueue timeout'' and the installer dies.
 ==== ovirt-guest-agent ====
 After installing a new VM, be sure to install VM guest agent.  This, at the very least, allows a VM's FQDN and IP address(es) to show up in the RHEV Web UI.
@@ Line 109: / Line 170: @@
     - (Make sure you make these changes persistent for subsequent reboots.  See https://askubuntu.com/a/921830/906620, for example)
   - Edit network config
+  - It's also probably beneficial to remove cloud-init: e.g., ''apt-get purge cloud-init''
+    - Even though cloud-init is purged, its grub.d settings still get read.
+    - It might work to just delete ''/etc/default/grub.d/50-cloudimg-settings.cfg'' but otherwise,
+      - Modify it and get rid of any ''console='' parameters
+      - Run ''update-grub''
 ===== Troubleshooting =====
@@ Line 117: / Line 183: @@
 ==== Emergency RHEV Web UI Access w/o VPN ====
 In the event the OpenVPN gateway VM is inaccessible/locked up/whatever, you can open an SSH tunnel (''ssh -D 9999 $YOURUSER@8.43.84.133'') and set your browser's proxy settings to SOCKS5 localhost:9999 to get at the RHEV web UI.  That public IP is on store01 and is a leftover artifact from when store01 ran OpenVPN.
+==== GFIDs listed in ''gluster volume heal ssdstorage info'' forever ====
+This is https://bugzilla.redhat.com/show_bug.cgi?id=1361518.
+As long as the unsynced entries are GFIDs only and they only appear under the arbiter (senta01) server, you can paste **just** the GFIDs into a ''/tmp/gfids'' file and run the following script:
+<code>
+#!/bin/bash
+set -ex
+VOLNAME=ssdstorage
+for id in $(gluster volume heal $VOLNAME info | egrep '[0-9a-f]{8}-([0-9a-f]{4}-){3}[0-9a-f]{8}' -o); do
+  file=$(find /gluster/arbiter/.glusterfs -name $id -not -path '/gluster/arbiter/.glusterfs/indices/*'  -type f)
+  if [ $(getfattr -d -m . -e hex $(echo $file) | grep trusted.afr.$VOLNAME* | grep "0x000000" | wc -l) == 2 ]; then
+    echo "deleting xattr for gfid $id"
+    for i in $(getfattr -d -m . -e hex $(echo $file) |grep trusted.afr.$VOLNAME*|cut -f1 -d'='); do
+      setfattr -x $i $(echo $file)
+    done
+  else
+    echo "not deleting xattr for gfid $id"
+  fi
+done
+</code>
 ----
@@ Line 163: / Line 252: @@
 ==== Onlining Hot-Plugged CPU/RAM ====
 https://askubuntu.com/a/764621
+<code>
+#!/bin/bash
+# Based on script by William Lam - http://engineering.ucsb.edu/~duonglt/vmware/
+# Bring CPUs online
+for CPU_DIR in /sys/devices/system/cpu/cpu[0-9]*
+do
+    CPU=${CPU_DIR##*/}
+    echo "Found cpu: '${CPU_DIR}' ..."
+    CPU_STATE_FILE="${CPU_DIR}/online"
+    if [ -f "${CPU_STATE_FILE}" ]; then
+        if grep -qx 1 "${CPU_STATE_FILE}"; then
+            echo -e "\t${CPU} already online"
+        else
+            echo -e "\t${CPU} is new cpu, onlining cpu ..."
+            echo 1 > "${CPU_STATE_FILE}"
+        fi
+    else
+        echo -e "\t${CPU} already configured prior to hot-add"
+    fi
+done
+# Bring all new Memory online
+for RAM in $(grep line /sys/devices/system/memory/*/state)
+do
+    echo "Found ram: ${RAM} ..."
+    if [[ "${RAM}" == *":offline" ]]; then
+        echo "Bringing online"
+        echo $RAM | sed "s/:offline$//"|sed "s/^/echo online > /"|source /dev/stdin
+    else
+        echo "Already online"
+    fi
+done
+</code>

Sepia Lab Wiki

User Tools

Site Tools

Differences

Page Tools