Differences

This shows you the differences between two versions of the page.

--- hardware:confusa [2021/03/07 12:45] – [Setting up as Jenkins slaves] akraitman
+++ hardware:confusa [2026/08/19 19:13] (current) – djgalloway
@@ Line 3: / Line 3: @@
 ===== Summary =====
-We have 14 confusa systems. Jenkins slaves in the upstream jenkins.
+We have 14 confusa systems donated by Ampere. They are ARM64 Jenkins builders in the upstream [[production:jenkins.ceph.com]].
+**Racking Ticket:** https://redhat.service-now.com/surl.do?n=PNT0805570
+Note: These did migrate from Red Hat to IBM.  I think they'd be good to use as teuthology testnodes to run ARM64 integration tests.
 ===== Hardware Specs =====
@@ Line 16: / Line 20: @@
 ^ Infiniband | 2 ports  | Mellanox           | 01GR252                                     | 25Gb            | Unused                                                                                                         |
-===== Setting up as Jenkins slaves =====
+===== Setting up as Jenkins agents =====
   - Reimage using Cobbler
   - Once the OS install is done,
@@ Line 23: / Line 27: @@
     - Run https://github.com/ceph/ceph-build/blob/master/ansible/examples/slave_static.yml
-    Note The ipmi password is a bit different because of password roles in the ipmi -
+===== BMC/OOB Access =====
+Please note that the ipmi password is a bit different here because of password rules in the BMC (note the trailing '!'):
     inktank/ApGNXcA7!
+ "Console Redirection" option in the BMC Web GUI doesn't appear to work.
+To use ''ipmi sol activate'', you must first set the baud rate to 115.2k:
+''ipmi <host> sol set volatile-baud-rate 115.2''
+''ipmi <host> sol set non-volatile-baud-rate 115.2''