Differences

This shows you the differences between two versions of the page.

--- testnodereimage [2016/06/29 19:11]
dgalloway created
+++ testnodereimage [2022/06/28 14:53]
djgalloway
@@ Line 1: / Line 1: @@
 ====== Reimaging Testnodes ======
 ===== Summary =====
-Testnodes can be reimaged using the [[Cobbler]] Web UI or CLI.  Both methods are documented here.
+[[hardware:mira]], [[hardware:smithi]], and [[hardware:gibba]] are automatically reimaged by [[services:FOG]] when locked using ''teuthology-lock''.
+Prior to 2018, we didn't have [[services:FOG]] and testnodes would need to be reimaged every so often using [[services:cobbler]] when the OS would get too mangled to re-use.  The [[services:dhcp]] server is configured to point smithi and mira to the [[services:FOG]] PXE server.  All other machine types can use Cobbler.
+Cobbler is configured using [[services:ceph-cm-ansible]] and primarily to install on ''/dev/sda'' on a machine with a single NIC.  If a machine has a more complex configuration than that, the **Manual** method below is recommended.
+===== set-next-server =====
+For machines that typically use FOG, you will need to tell the DHCP server to point whatever machine you're reimaging to Cobbler's PXE server instead of FOG's. You can do this with [[https://github.com/ceph/ceph-cm-ansible/blob/main/tools/set-next-server-local.sh|set-next-server-local.sh]]. e.g.,<code>
+dgalloway@p50 ~ ()$ set-next-server-local.sh smithi071 cobbler
++ ssh store01.front.sepia.ceph.com 'sudo /usr/local/sbin/set-next-server.sh smithi071 cobbler && sudo service dhcpd restart'
++ dhcpconfig=/etc/dhcp/dhcpd.front.conf
+++ date +%s
++ timestamp=1656427483
++ cobblerip=172.21.0.11
++ cobblerfilename=/pxelinux.0
++ fogip=172.21.0.72
++ fogfilename=/undionly.kpxe
+++ sed -n '/host smithi071-front/,/}/p' /etc/dhcp/dhcpd.front.conf
+++ grep 'hardware ethernet'
+++ awk '{ print $3 }'
+++ tr -d ';'
++ macaddr=0c:c4:7a:8f:d7:65
+++ sed -n '/host smithi071-front/,/}/p' /etc/dhcp/dhcpd.front.conf
+++ grep fixed-address
+++ awk '{ print $2 }'
+++ tr -d ';'
++ ipaddr=172.21.15.71
+++ grep -n smithi071 /etc/dhcp/dhcpd.front.conf
+++ cut -d : -f1
++ linenum=2111
++ '[' -z 0c:c4:7a:8f:d7:65 ']'
++ '[' -z 172.21.15.71 ']'
++ '[' -z 2111 ']'
++ cp /etc/dhcp/dhcpd.front.conf /etc/dhcp/dhcpd.front.conf_1656427483.bak
++ sed -i '/host smithi071-front {/,/}/d' /etc/dhcp/dhcpd.front.conf
++ '[' cobbler == cobbler ']'
++ sed -i '2111 i \  host smithi071-front {\n\    hardware ethernet 0c:c4:7a:8f:d7:65;\n\    fixed-address 172.21.15.71;\n\    next-server 172.21.0.11;\n\    filename "/pxelinux.0";\n\  }' /etc/dhcp/dhcpd.front.conf
++ dhcpd -q -t -cf /etc/dhcp/dhcpd.front.conf
++ '[' 0 '!=' 0 ']'
++ rm /etc/dhcp/dhcpd.front.conf_1656427483.bak
+Redirecting to /bin/systemctl restart  dhcpd.service
+</code>
+**Be sure to set it back to FOG when you're done!**
 ===== Cobbler Web UI =====
 If you don't already have a Cobbler Web UI account, request one by [[http://tracker.ceph.com/projects/lab/issues/new|filing a ticket]].
-==== Single Testnode ====
+==== Single Machine (Manual [NOT USING KICKSTART]) ====
+  - Log in at https://cobbler.front.sepia.ceph.com/cobbler_web/
+  - Click **Systems** on the left sidebar
+  - Locate the system you want to reimage
+    - If desired, increase the **Items/page** dropdown in the upper right corner
+  - Click the system's name under the **Name** header
+  - Go to the **Networking** tab
+  - Make a note of the current MAC address
+  - Change the MAC address to ''DE:AD:BE:EF:AF:AF'' or something else you know is bogus (this makes sure the PXE server doesn't recognize the machine you're reimaging after it reboots so that you get the Cobbler Menu)
+  - **Save**
+  - Open a Java Web Console by logging into the target machine's IPMI Web UI (''target.ipmi.sepia.ceph.com'')
+  - Reboot the machine either using the Java Web Console menu or [[https://wiki.sepia.ceph.com/doku.php?id=testnodeaccess#ipmi|ipmitool]]
+  - Watch the Java Web Console.  You should eventually be presented with the Cobbler Menu which should look something like [[https://s24255.pcdn.co/wp-content/uploads/2014/07/CentOS-6.5-PXE-Client-Running-Oracle-VM-VirtualBox_010.png|this]]
+  - Arrow down and highlight the OS you intend to install.  Then **press Tab**
+  - Erase everything **except** the ''initrd='' and ''vmlinuz='' parameters.
+    - If you're installing CentOS or RHEL, you **must** also add ''%%inst.repo=http://172.21.0.11/cobbler/ks_mirror/DISTRO%%'' (e.g., ''%%inst.repo=http://172.21.0.11/cobbler/ks_mirror/CentOS-7.5-x86_64%%'')
+  - Press **Enter**
+  - You should end up with a graphical installation
+  - When you're done, go back in the Networking settings for the machine and set the MAC address back.
+==== Single Machine (Automated [USING KICKSTART]) ====
   - Log in at https://cobbler.front.sepia.ceph.com/cobbler_web/
   - Click **Systems** on the left sidebar
@@ Line 15: / Line 79: @@
   - Check **Netboot Enabled**
   - Click **Save**
-  - Power cycle the testnode
+  - [[https://wiki.sepia.ceph.com/doku.php?id=testnodeaccess#power_cycle_example|Power cycle]] the testnode
-==== Multiple Testnodes ====
+==== Multiple Machines (Automated) ====
   - Log in at https://cobbler.front.sepia.ceph.com/cobbler_web/
   - Click **Systems** on the left sidebar
@@ Line 27: / Line 91: @@
   - Select **Netboot Enabled** under the **Batch Actions** drop-down at the top
   - Click **OK**
-  - Power cycle the testnodes you wish to reimage
+  - [[https://wiki.sepia.ceph.com/doku.php?id=testnodeaccess#power_cycle_example|Power cycle]] the testnodes you wish to reimage
 ===== Cobbler CLI =====

Sepia Lab Wiki

User Tools

Site Tools

Differences

Page Tools