User Tools

Site Tools


hardware:reesi

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
hardware:reesi [2019/08/01 23:46] – [Table] djgallowayhardware:reesi [2019/08/01 23:49] (current) – djgalloway
Line 25: Line 25:
  
 ===== OSD/Block Device Information ===== ===== OSD/Block Device Information =====
-The reesi have 12x 4TB HDD and 1x 800GB NVMe.+The reesi have 11x 4TB HDD, 1x 12TB HDD, and 1x 800GB NVMe. 
 + 
 +The 12TB were added to so we can say we're testing on drives larger than 8TB.
  
 The NVMe device is split into two equal partitions: The NVMe device is split into two equal partitions:
Line 92: Line 94:
  
 ===== Replacing Drives ===== ===== Replacing Drives =====
-Like the [[hardware:mira]], the drive letters do **not** correspond to drive bays.  So ''/dev/sda'' isn't necessarily in Drive Bay 1.  Keep this in mind when zapping/setting up OSDs.  Drive ''/dev/sda'' may not necessarily have its WAL Device on ''/dev/journals/sda''.+Like the [[hardware:mira]], the drive letters do **not** correspond to drive bays.  So ''/dev/sda'' isn't necessarily in Drive Bay 1.  Keep this in mind when zapping/setting up OSDs.  Also, drive ''/dev/sda'' may not necessarily have its WAL Block on ''/dev/journals/sda''.
  
 While watching the front of a system, send ''dd if=/dev/$DRIVE of=/dev/null'' where ''$DRIVE'' is the drive you're replacing to identify each drive. While watching the front of a system, send ''dd if=/dev/$DRIVE of=/dev/null'' where ''$DRIVE'' is the drive you're replacing to identify each drive.
hardware/reesi.1564703191.txt.gz · Last modified: by djgalloway