This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
| 
                    hardware:reesi [2019/08/01 19:08] djgalloway [Replacing Drives]  | 
                
                    hardware:reesi [2019/08/01 23:49] (current) djgalloway  | 
            ||
|---|---|---|---|
| Line 10: | Line 10: | ||
| ===== Hardware Specs ===== | ===== Hardware Specs ===== | ||
| - | | ^ Count ^ Manufacturer  ^ Model ^ Capacity  ^ Notes ^ | + | | ^ Count ^ Manufacturer  ^ Model ^ Capacity  ^ Notes ^ | 
| - | ^ Chassis  | 2U | Supermicro  | SSG-6028R-E1CR12H  | N/A |  | | + | ^ Chassis  | 2U | Supermicro  | SSG-6028R-E1CR12H  | N/A |  | | 
| - | ^ Mainboard  | N/A | Supermicro  | X10DRH-iT  | N/A |  | | + | ^ Mainboard  | N/A | Supermicro  | X10DRH-iT  | N/A |  | | 
| - | ^ CPU | 1 | Intel | Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz  | N/A | [[https://ark.intel.com/products/92986/Intel-Xeon-Processor-E5-2620-v4-20M-Cache-2_10-GHz|ARK]]  | | + | ^ CPU | 1 | Intel | Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz  | N/A | [[https://ark.intel.com/products/92986/Intel-Xeon-Processor-E5-2620-v4-20M-Cache-2_10-GHz|ARK]]  | | 
| - | ^ RAM | 4 DIMMs | Samsung  | M393A2G40EB1-CRC  | 16GB | 64GB total | | + | ^ RAM | 4 DIMMs | Samsung  | M393A2G40EB1-CRC  | 16GB | 64GB total | | 
| - | ^ SSD | 2 | Intel | SSDSC2BB150G7 (S3520)  | 150GB | Software RAID1 for OS | | + | ^ SSD | 2 | Intel | SSDSC2BB150G7 (S3520)  | 150GB | Software RAID1 for OS | | 
| - | ^ HDD | 12 | Seagate  | ST4000NM0025  | 4TB | SAS 7200RPM for OSDs | | + | ^ HDD | 11 | Seagate  | ST4000NM0025  | 4TB | SAS 7200RPM for OSDs | | 
| + | ^ HDD | 1 | HGST | HUH721212AL5200  | 12TB | SAS 7200RPM added 1AUG2019 at Brett's request.  | | ||
| ^ NVMe | 1 | Micron  | MTFDHBG800MCG-1AN1ZABYY  | 800GB | Carved up as logical volumes on two partitions.  400GB as an OSD and the other 400GB divided by 12 for HDD OSD journals  | | ^ NVMe | 1 | Micron  | MTFDHBG800MCG-1AN1ZABYY  | 800GB | Carved up as logical volumes on two partitions.  400GB as an OSD and the other 400GB divided by 12 for HDD OSD journals  | | ||
| - | ^ NIC | 2 ports | Intel | X540-AT2  | 10Gb | RJ45 (not used) | | + | ^ NIC | 2 ports | Intel | X540-AT2  | 10Gb | RJ45 (not used) | | 
| - | ^ NIC | 2 ports | Intel | 82599ES  | 10Gb | 1 port cabled per system on front VLAN | | + | ^ NIC | 2 ports | Intel | 82599ES  | 10Gb | 1 port cabled per system on front VLAN | | 
| - | ^ BMC | 1 | Supermicro  | N/A | N/A | Reachable at $host.ipmi.sepia.ceph.com  | | + | ^ BMC | 1 | Supermicro  | N/A | N/A | Reachable at $host.ipmi.sepia.ceph.com  | | 
| ===== OSD/Block Device Information ===== | ===== OSD/Block Device Information ===== | ||
| - | The reesi have 12x 4TB HDD and 1x 800GB NVMe. | + | The reesi have 11x 4TB HDD, 1x 12TB HDD, and 1x 800GB NVMe. | 
| + | |||
| + | The 12TB were added to so we can say we're testing on drives larger than 8TB. | ||
| The NVMe device is split into two equal partitions: | The NVMe device is split into two equal partitions: | ||
| Line 91: | Line 94: | ||
| ===== Replacing Drives ===== | ===== Replacing Drives ===== | ||
| - | Like the [[hardware:mira]], the drive letters do **not** correspond to drive bays. So ''/dev/sda'' isn't necessarily in Drive Bay 1. Keep this in mind when zapping/setting up OSDs. Drive ''/dev/sda'' may not necessarily have its WAL Device on ''/dev/journals/sda''. | + | Like the [[hardware:mira]], the drive letters do **not** correspond to drive bays. So ''/dev/sda'' isn't necessarily in Drive Bay 1. Keep this in mind when zapping/setting up OSDs. Also, drive ''/dev/sda'' may not necessarily have its WAL Block on ''/dev/journals/sda''. | 
| While watching the front of a system, send ''dd if=/dev/$DRIVE of=/dev/null'' where ''$DRIVE'' is the drive you're replacing to identify each drive. | While watching the front of a system, send ''dd if=/dev/$DRIVE of=/dev/null'' where ''$DRIVE'' is the drive you're replacing to identify each drive. | ||